Wire partitions by WireWay - Husky^®

Woven Wire Partitions

^{See some
facts to consider in buying wire partitions}

Woven Wire Partitions and Security Enclosures

Click the image just below to help you with your sketch:

e-mail or fax your layout to us: support@sourceequipment.com or 1-978-537-3498 and receive pricing within 24 hours!

or ... call us toll-free:

Wire Partitions of any size, and for any height, at extremely competitive pricing!

FAX or email a DRAWING OF YOUR LAYOUT to us for a Quick-Quote!

1-978-537-3498
_______________________________________________

48 hour shipment

on standard size wire panels and configurations.

Made by Wireway / Husky :
the most respected and recognized name in the business.

	Any Configuration of Woven Wire Partitions for secure storage including roofs, sliding doors, swing doors, and slide-up doors, hinged dutch doors, service windows, double swing doors. Special configuration? No problem!
	Full Security Enclosures with roofs, including wall channels and supporting beams, sliding doors, swing doors, and double swing doors of any height, any size, any configuration. Special height? We can do that!
	Wire Partitions are Completely Modular in design and fully reconfigureable. Need more partitions? Just add on standard panels, or reconfigure what you have!
	Galvanized wire partitions for outside use.
	Diamond Weave construction, 1-1/2 in., at 45 degree angles, 10 gauge wire, or rectangular square reticulation! "Best Locks" available.
	Mortised and Tenoned Joints.
	Installation of Wire Partitions in New England is readily available from Source Equipment.

	Wire Partitions are less expensive than "chain link fence".
	Unlike chain-link fencing, wire partitions can be taken down, moved, relocated, and reassembled in entirely different configurations to suit your changing needs.
	Wire partitions are modular, using standard wire panels from 1 ft. wide to 5 ft. wide. Virtually every piece you use can be re-used in another location.
	Doors and Gates use cylinder locks that can be keyed alike or differently.
	What is more, damaged wire panels or posts are easily replaced ... unlike chain link fence.
	Unlike chain link fences, wire partitions cannot be easily climbed because their 1-1/2 in. diamond weave allows no toe hold – which is why wire partitioning is much more secure. Need to move your partition a few feet over? No sweat. Just unbolt your posts and lag it to the floor where you want it.

	A simple line drawing will suffice, even by hand. Or you can send us a CAD drawing as an e-mail attachment to: support@sourceequipment.com
	Make VERY SURE of EXACT distances between walls – up to 1/8 of an inch – if you plan to put wire partitions between existing walls.
	Tell us how high you want your wire security partition to be.
	What type of doors you want? Sliding Doors (which do not obstruct aisles), *Swing Doors, or Dutch Doors*? All are constructed of woven wire and have cylinder locks.
	Show us where you want your doors located (e.g. 15 feet from the wall on the left, or from the corner of a multi-sided figure)

That's it! Now just fax it to us:

1-978-537-3498

Need help figuring it out? Call us:

... no annoying voice menus, no waiting ... just people to serve you

for an ALPHABETICAL LISTING of products see LEFT SIDE BAR